- Home > Products > GPS Tracker
- VTU-518-3G
VTU-518-3G
Ⅰ. Attention
1. Make sure to read this manual carefully before using this product.
2. Please insert the SIM card before installing, and make sure the SIM card has no password, otherwise the tracker will not work normally.
3. Please make sure that all the cables of the tracker has been connected rightly, and then connect the tracker to host power. Must not install or take down the tracker when it is power on. If you found any troubles or omissions about the connections of cables, please cut off power first, otherwise you will easily damage the tracker.
4. The tracker works in wireless communications, so please cut off the host power before your vehicles entering fuel depot and dangerous material place.
5. The tracker’s work voltage is 9V-40V. Please use the tracker in the scope of work voltage.
6. The host of Compass/GPS tracker is a low-power wireless transmitter and receiver. It receives and sends radio frequency signal when it is working.
7. To avoid electromagnetic interference or incompatible configuration, please stop using your tracker in the noticed place.
Ⅱ. Equipment Compose
The terminal supports all mobile communication network, supports GPS or Compass navigation or positioning system. Terminal serials have 4 types,VMTC1x,VMTC2x , VMTC4x and VMTC6x.
Start Up：
Put the SIM card in place and installed the tracker in the car, the red indicator light is on. About 20 seconds, the unit will begin to work and acquire the mobile network signals as well as the GPS/Compass signals, and the red indicator light will keep flashing every 2 seconds when the mobile module is no communication. When the blue indicator light is on, the unit has been located.
Ⅲ. Main Function:
1. Positioning and Tracking: Through the on-line Positioning Platform or the cell phone to locates at times, and get the working status. You can choose the Positioning Platform by yourself.
2. Triggering Emergency Alarm: When there is an emergency happened on the vehicle, you can put on the button and the installed unit to send out alarm to the authorized numbers.
3. Remote controlling oil and circuit: You can control the oil and circuit via the unit by SMS in anywhere and anytime.
4. Remote Monitoring: In anywhere and anytime, call the phone number in the unit, when it connects, you can monitor the sound around 5 meter from the vehicle.
5. Movement Alert: Send SMS to the unit to start the movement alert function. When the vehicle is moving, the unit will send the movement alert to all authorized numbers.
6. Overspeed Alert: Send SMS to the unit to start the movement alert function. When the vehicle is overspeed, the unit will send the overspeed alert to all authorized numbers.
7. Geo-fence: Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to all authorized numbers when it beyond the district.
8. Get the geography information: read the terminal's location information via SMS.
9. Read terminal address: read the terminal's address information via SMS, this function need to be supported by platform.
10. Auto Tracker Function: set up auto tracking function by SMS or online tracking platform.
11. Mileage statistics, Ignition detecting , cutting off power and alarm.
12. Compatible with the original anti-theft alarm: It will send SMS alarm after the original anti-theft alarm warning.
13. The IP setting can be modified .
14. Support LED advertisement screen. Platform center can send advertisement message to car with this tracker and LED advertisement screen.(OEM)
15. Fuel monitoring function, only support voltage type sensor. (OEM)
16. Temperature detecting function.
17. OverSpeed alarm by buzzer output.(OEM)
18. upgrade by mobile communication network
19.RS232/485 and CAN bus port support.
20.Hardware watchdog, guarantee 24 hours of trouble free operation.
Set Up
1. Set administrator
There are two modes of operation. One is administrator mode, another is no administrator. Send SMS
setadmin + PASSWORD
to the unit, it will make you as administrator number. Delete the administrator number from the administrator cell phone, it will be back to no administrator.
2. Add the number
If there is an administrator, only the administrator can add number to the tracker . Send SMS
admin+PASSWORD+SPACE+NUMBER
to device to add a new number. example: "admin123456 13612345678","admin" as instruction, "123456" as password, "13612345678" as added number.
3. Delete the number
If there is an administrator, the administrator can delete number to the tracker . Send SMS
admin+PASSWORD+SPACE+NUMBER
to device to delete a exist number. example: "noadmin123456 13612345678". "noadmin" as instruction, "123456" as password, "13612345678" as deleted number.
If the administrator deletes his own number, the tracker is back to the no administrator, and the record numbers deleted automatically.
4. Change the Password
password + OLD PASSWORD + SPACE + NEW PASSWORD
to change the password. For example: Send SMS "password123456 168168". "password" as instructions, "123456"as old password, "168168" as new password. Password must be six digits. Tracker’s initial password is 123456. If there is no administrator number, all number can change the password. If there is already an administrator number, only the authorized number can change the password.
5. Control Oil
stopoil+ PASSWORD
to control oil. For example send SMS: stopoil123456 "stopoil" as instructions, "123456"as password.
To supply the oil again,
supplyoil+ PASSWORD
to the unit. For example, send SMS “supplyoil
6. Control Circuit
Send SMS
stopelec+ PASSWORD
to control circuit. For example send SMS: “stopelec
To supply the circuit again, send SMS
supplyelec+ PASSWORD
to the unit. For example, send SMS "Supplyelec123456" to the tracker. "Supplyelec" as instruction, "123456" as password.
7. Monitor mode
There are three mode for monitor.
1) All Monitor Mode: Send SMS
allmonitor to the unit, the unit will return to this mode. In this mode, any number can monitor this unit.
2) Restrict Monitor Mode: Send SMS
restrictmonitor to the unit, the unit will return to this mode. In this mode, authorized number can monitor this unit.
3) Close Monitor Mode: Send SMS
closemonitor to the unit, the unit will return to this mode. In this mode, all number cann’t monitor this unit.
8. Movement alert
Set up: The user can send SMS
move + PASSWORD
to the unit, then the unit will reply "move ok!" .In case of such a movement, it will send SMS "move" along with a Geo-info to the number.For example, send SMS “Move
Cancel: Send SMS
nomove + PASSWORD
to deactivate the movement alert.
9. Overspeed alert
Set up: Send SMS
speed+ PASSWORD +SPACE+Speed
to the unit. For example, send SMS "speed123456 080". "speed" as instructions, "80" as limit speed, "123456"as password.
Cancel: Send SMS
nospeed+ PASSWORD
to deactivate the overspeed alert.
10. Cell phone positoning
Send SMS
position
to the unit, then the unit will send SMS with real-time longitude and latitude to the cell phone.
11. Tracking with a online positioning platform
Add the number on the online positioning platform for tracking. Adding to the special platform, send SMS
number+TRACKER ID
to the tracker. for example "number13480887466".
12 . Restart the tracker.
Send SMS
reboot+ PASSWORD
to the tracker. For example"reboot123456".The tracker will be restarted.
13.Auto track
track + INTERVALS
Report a Geo-info at 30 seconds intervals to the online position platform for 5 times: Send SMS "track30" to the unit. The max intervals is 1800 seconds.
14. Resume the initial password
If you forget your password, you can resume the initial password 123456.Send
resume + PASSWORD
to the tracker, the tracker will resume the initial password. If there is no administrator number, all number can resume initial password. If there is already an administrator number, only the administrator number can resume initial password.
15. Modify IP address and port
The IP address and port of the tracker can be modified and transferred data to other platform. Send SMS
ip + IP ADDRESS + port + PORT VALUE
to the unit. If the platform’s IP address and port is 123.45.67.89:1234,please send SMS "ip 123.45.67.89port12345" to the tracker.
16. Set APN
In order to send GPS data to IP address, you still must set mobile network Access Point Name (APN). If you don’t know the APN, you can consult local network service supplier. The format of set APN is
apn + PASSWORD +space + APN
For example you send SMS "apn123456 cmnet" to the device. The device will reply SMS "Set APN ok.".
17. Set GPRS user name and password
Some country must set GPRS user name and password for GPRS usage. The format is
user + USER NAME + PASSWORD
For example send SMS "user abc 123", “user” is command, "abc" is GPRS user name, "123" is GPRS password. The device will reply SMS “set GPRS user name and password OK.”.
18. Set Time zone
In the default, tracker wills response Geo SMS with UTC time. You can adjust time to your local time. The format is
zone + PASSWORD +TIME ZONE
For example "zone123456 8" or "zone123456 -8", "8" stand for east 8 time zone, "-8" stand for west 8 time zone. The tracker will reply SMS "Set Time Zone OK.".
19.Auto tracking by ignition on or off
ignon+ INTERVALS
Report a Geo-info at 30 seconds intervals to the online position platform by ignition on: Send SMS "ignon30" to the unit. The max intervals is 300 seconds.
ignoff+ INTERVALS
Report a Geo-info at 30 seconds intervals to the online position platform by ignition off: Send SMS "ignoff30" to the unit. The max intervals is 1800 seconds.
20.To get google link by SMS
map
send "map" to unit, then will reply SMS with google link address information.
21.To read terminal status by SMS
info
send "info" to unit, then will reply terminal setting and running information by SMS.
Ⅳ. Condition of Function Implement:
Mobile communication network flux card which supports internet function.
Ⅴ. Installation Diagram
Installation Diagram of the Tracker:
VMTC1x interface diagram
VMTC1x is a ALL-IN_ONE model it is easy to setup on car. Power in like as follow:
VMTC2x interface diagram
Description of Color Connecting Line for VMTC2x:
|
Foot Position No. |
the basic products has no fuel monitoring and temperature detecting and buzzer output function.
VMTC4x interface diagram
cause VMTC4x has flexible interface define, here just show the default interface.
Rs232 port interface as follow
VMTC6x interface diagram
Port I define as follow:
Port II,III,IV and V define as follow:
Multi.IO define as follow:
Vehicle Terminal Installation
Vehicle terminal should be installed by technical professional of local service centre. Without permission, the user can't repair and move the tracker randomly. If users do, any unfortunate damage should be compensated by himself. Installation steps (caution: the following installation should under no power, otherwise will be dangerous)
1.Power supply line: The red wire connects 12V"+",Black wire connects to 12V"-"
2. Wire for cutting off oil of the tracker
Yellow wire connects the relay pin 86, 85 pin connect to 12 V DC , 87 pin and 30 pin in series power supply circuits. Caution: Wrong connection of yellow wire will damage the tracker.
3. Wire for cutting off circuit of the tracker
White wire connects relay pin 86, 85 pin to 12 V DC, 87 pin and 30 pin are in series power supply circuits. Caution: Wrong connection of yellow wire will damage the tracker.
4. Emergency triggering alarm
The blue wire connects the positive of the alarm button, and the black wire connects the negative of the alarm button.
Ⅵ. Application:
1. Global positioning, Vehicle locating
2. Real-time monitoring, Timing tracking
3. Cutting off power and circuit by remote control
4. Vehicle rental / Fleet management etc
Ⅶ. Specification:
|
Item |
Terminal |
|||
|
VMTC1x |
VMTC2x |
VMTC4x |
VMTC6x |
|
|
GSM |
900MHz,1800MHz,1900MHz (850MHz Optional) |
|||
|
CDMA |
800MHz |
|||
|
WCDMA |
2100MHz |
|||
|
FDD-LTE |
800/850/900/1800/2100/2600MHz |
|||
|
GPS Chip |
SiRF III/Compass |
|||
|
GPS Sensitivity |
-160dBm |
|||
|
GPS Accuracy |
3 – 30m |
|||
|
Network |
SMS,GPRS,CDMA 1x,4G |
|||
|
Way of Tracking |
Cell Phone or Platform |
|||
|
Dim. |
66*46*25mm |
86*56*25mm |
86*63*27mm |
114*90*30mm |
|
Weight |
0.126Kg |
0.146Kg |
0.158Kg |
0.238Kg |
|
Operation Temp. |
-20°Cto+ |
|||
|
Storage Temp. |
-40°Cto+ |
|||
|
Work Humidity |
5-95%RH |
|||
|
Work Voltage |
DC 9V－40V |
|||
|
Battery |
3．7V / 650mAh |
|||
|
Standby Work Current |
< 50mA |
|||
|
Temperature Range |
-20~90℃ |
|||
|
Fuel power in voltage |
0~15.5V |
|||
|
Fuel signal out voltage |
0~6.6V |
|||
Note：The terminal only supports GSM or CDMA or LTE network.
Ⅷ. Important Safety Precautions
1. Because of the tracking function, user must use this product in legitimate scope. If used in illegal application (such as: intentionally used to violate another’s privacy, etc.) and results in the damage of another’s rights and interests, user must take responsible for himself.
2. Before using this product, ensure the correct operation of this product, be sure to read the notes and instructions in this manual, avoid improper operation causing accidents and injuries.
3. The product obtains the corresponding location information through the satellite positioning (GPS), satellite-based positioning will be affected by the weather and environmental factors, in some circumstances there will have smaller error in location information is normal.
4. The product uses mobile communication system to send location information, before using, please confirm to the local mobile telecom you SIM card has open data service.
5. Please handle with care of the product, avoid mechanical vibration of shaking.
6. Please use dry cloth to clean this product shell, cannot use chemical, cleaning agents, or strong detergents to clean this product.
7. Do not use any paint daub this product. This will clog sundries in the moving parts, thus affecting the normal operation of this product.
8. Do not demolish antenna yourself, and also cannot use other antennas of other objects to replace, this may seriously affect the quality of communication, and may even change the antenna radiation harmful to your health.
9. When using this product user should put the product on proper place avoid a strong impact, vibration or throw the product, resulting in damage occurred in various parts.
10. The product and the accessories (including batteries and chargers, etc.), do not have waterproof feature, please used with caution.
11. Please use the accessories designated by manufacturer (including batteries and charger), the use of any other accessories will make warranty service invalid. Due to the use of non-original accessories and caused damage, the product manufacturer will not take any warranty responsibility.
12. Do not allow metal objects (such as the key in your pocket) near the battery, avoid generate short-circuit of battery contact.
13. Do not bend or force open the battery, or put the battery in water or fire.
14. Battery power using up or discharged batteries, please dispose of used battery according to your local environmental laws and guidelines.
15. Do not stamp any of the fire source (such as: the candles have been lit) on the product.
16. Do not place this product humid, high temperature, or too much dust, so as to avid failure.
17. Do not place this product in the microwave or other high-voltage devices, in order to avoid damage of the accessories.
18. This product is a high-frequency equipment, cannot be used in non-volatile liquid environment, in order to avoid and explosion or injury.
19. Do not unauthorized dismantling of all parts of the product or to ensure the normal use of this product.
Ⅸ. Guarantee
Guarantee Item:
1. Three months upon date of purchase, if there is function problem, we should offer the same item subject to goods and packing maintain perfect.
2. One year upon date of purchase, we will guarantee to keep the goods in repair.(not including fittings)
3. Guarantee service is subject to normally using.
4. All of damage by man-made(tear open the housing, tear off the sticker, unmorally using),or losing this card, we will not guarantee.
|
|
Color |
Function |
|
1 |
Red |
Power in |
|
2 |
Black |
Ground |
|
3 |
Pink |
Original Car Alarm |
|
4 |
Black |
SOS User Alarm Negative High trigger input(OEM) Low trigger input(OEM) |
|
5 |
Green |
ACC Detection |
|
6 |
Blue |
SOS User Alarm Positive |
|
7 |
Purple |
0~6V fuel signal detecting Low trigger input(OEM) TXD,3.3V TTL(OEM) |
|
8 |
White |
Electricity Control(or buzzer output) |
|
9 |
Grey |
0~15V analog signal in Low trigger input(OEM) RXD,3.3V TTL(OEM) |
|
10 |
Yellow |
Oil Control |
Tel:+86-25-87771386 Fax:+86-25-87771386 Email:mr.sun@taffgps.com
《中华人民共和国增值电信业务经营许可证》ICP证编号：苏B2-20130193
All Rights Reserved 苏ICP备09057672号