（GPS+GSM+SMS/GPRS）Vehicle Tracker

1、Product functions
1.1 GSM frequency ranges: 850/900/1800/1900;
1.2 Ultra-Wide Input Range: 8-50V DC;
1.3 Continuous GPS positioning, and GPRS real-time report;
1.4 Support location enquiry through SMS;
1.5 Built-in vibration sensor for intelligent vehicle anti-theft system;
1.6 ACC ignition detection, with vehicle status prompted;
1.7 External fuel/electricity cut-off relay for remote control of vehicle;
1.8 Support three SOS specific phone numbers for remote monitoring & alarm;
1.9 External SOS switch knob for emergency call;
1.10 External microphone for remote voice monitoring;
1.11 Built-in standby battery for alarm for illegal wire cut-off;
1.12 Compatible external device serial communications.

2、Operating Instructions




3、Terminal’s location selection and installation 
The terminal is installed at a covert position; it is commended that the terminalbe installed at a covert position by a professional agent designated by the dealer; the following points shall be taken into account:
3.1 The terminal shall be installed at a covert position to guard against destruction by thieves;
3.2 The terminal shall be kept separate from emission source, such as parking assist device, burglar alarm or on-board communications device;
3.3 The terminal can be fixed with ribbon or double-sided foam tape;
3.4 The terminal has built-in GSM antenna and GPS antenna, which shall face upwards (skywards) and is not obstructed by metal objects above; recommended positions for installation:
Covert position at the panel below the front windshield;
Covert position around the front instrument panel (non-metal material for the surface);
Decorative panel below the rear windshield;

4、Operations of the terminal：
Command format for setting the following functional parameters uses the lower-case letters with English punctuation marks; all commands sent shall receive replies; information of successful setting will be given if the setting for parameter commands are successful; if not, parameters shall be reset.  
Location information searching function is operable for all mobile phones while the remaining functions should be through the service center.
Sending corresponding enquiry commands will receive corresponding messages from the terminal.
Send SMS command "balance+password+space+phone
1.Increase the specific phone：
Send SMS command：admin+password+space+phone
E.g：admin123456 13712345678  
reply ：admin ok
2.Delete a specific phone
Send SMS command：noadmin+password+space+phone
E.g：noadmin123456 13712345678 
reply ：noadmin ok
4.1 ACC working alarm
4.1.1 ACC in open status(the key opens the switch), the anti-theft function cancel automatically.
4.1.2  ACC in colosed status (the key switch in the closed status), the anti-theft function open.
4.2 Vibration alarm:
4.2.1 Open the Vibration alarm：vibalm + password, E.g vibalm123456
reply：vibrator sms alarm set ok
4.2.2close the Vibration alarm：no vibalm + password, E.g no vibalm123456
reply：no vibrator sms alarm set ok
4.2.3Open the Telephone alarm：vibcall + password, E.g vibcall123456 ）
reply：vibrate phone alarm set ok
4.2.4close theTelephone alarm：no vibcall + password, E.g no vibcall123456
reply：no vibrate phone alarm set ok
Automatic dormancy: ACC closed, stoped for more than 10 minutes, automatically enter the sleep state to save power, once vibration, the device wake up immediately, or the owner call SIM card to make it wake up.
4.3  Alarm operation through SOS number
In the event of an emergency, press the SOS button to trigger the SOS emergency alarm for help. The terminal will send the alarm information to the service platform together with information about longitude and latitude degrees; and the alarm signal will be sent to the pre-set SOS numbers by making a phone; it will repeat dialing the SOS numbers; three times at maximum if the phone is unanswered.
Note: For SOS alarm service, please first set the SOS number!
4.4 monitor terminal:
Send SMS command：JT
The specific phone number send this SMS to SIM card, the tracker dual back to the number for monitoring. 
Reminder: Set the specific phone number to before use this function.
4.5 location query SMS command：
When need to query the location of the terminal device, write position query SMS and sent to the terminal SIM card, it reply the latest location.
Send SMS command：DW E.g: 75th,Guanlan Road,Guanlan Town,Baoan district,Shenzhen ,China
CHECK Latitude and longitude Send SMS command：DWJW
4.6 Demounting alarm：
When the device is removed, it will trigger power off alarm (the platform also will receive battery were removed), the device will send SMS of power outage alarm to a certain number setted SOS, and call it constantly, until the dial is answered.
4.7 cut off fuel or circuit：
When the car is theft, the tracking platform will send cut off fuel or circuit command actively, to ensure the car under safety  driving, cut off engine of the stolen car, to make the stolen car cannot be started.
Reminder: To ensure car safety diving, the terminal device only operate cutting off fuel or circuit under the status of both GPS location available and the speed of car less then 20km/h or car stopped.  
When disaster warning lifted, tracking platform send recovery fuel and circuit SMS command manually, terminal device restore fuel and circuit, the vehicle will continue to drive.
cut off fuel or circuit   Send SMS command：DY
Restoring Fuel, circuit    Send SMS command：KY
4.8 Real time tracking: web version query
4.8.1 Mobile real tracking: web on mobile
E.g: http://www.zg002gps.com:8080/webgps/m                 
4.8.2 Tracking platform on computer:
E.g: http://www.zg002gps.com:8080/webgps                   
4.9 Tracking playback：
Login platform, click "historical tracking playback"function
4.10 Report statistics (Parking report, Driving report, Mileage statistics, Over speed report )
Login platform, Click "Report statistics "
4.11 Modifying password
Reminder: the vehicle owner  can only bind one number only, the last setting one is valid.
The default code for the user: 123456
Modifying password SMS command: password123456 666888 （666888 is new password）
4.12 restart the gps tracker: 
Send SMS command：CQGPS
4.13 restore the factory setting:
Send SMS command：FORMAT
4.14 restart the  tracker:
Send SMS command：CQ
4.15 Query device SMS:
Send SMS command：CXZT
4.16 APN Setting:
Set APN SMS form:  apn123456 cmnet
Set APN user name SMS form: apnuser123456 user
Set APN password SMS form: apnpasswd123456 password 
4.17 Setting for IP address and port number of the server platform ：
Send SMS command：adminip123456 60.191.150.102 8500
Below Command, 1234 is the  first 4 digits ( 123456 default password)
4.18 Over speed alarm:
Over speed SMS alarm upper limit: SZCS,1234,SPEED=130 UNIT: KM
4.18.1 Close Over speed SMS notice: SZCS,1234,SPEED=0 (default) Reply: Modify command ok
4.18.2 Open Over speed SMS notice: SZCS,1234,SPEED=130  Reply: Modify command ok
4.19 remove alarm：
Send SMS command：SZCS,1234，RADIUS=300（default）UNIT: M Reply: Modify command ok
4.20 Query monitor number
Send SMS command：CXCS,1234，SOS#
4.21 Query alarm number
Send SMS command：CXCS,1234，USER#
4.22 SMS defence
Set defence SMS: Send SMS command：SF reply ：SF ok
Withdraw defence SMS: Send SMS command：CF reply ：CF ok

8、Trouble-shooting
a. The terminal, after initial installation, fails to connect to the server, and the server displays "offline".
Please check the terminal's installation:
 1) Check whether the main power line is connected correctly; Note: Do not connect it to the vehicle's internal control line.
 2) Check whether the SIM card is inserted correctly; please refer to the installation instructions.
 3) Check the status of LED indicator; when working normally, the red power indicator flashes 1s after every 2s; the green GSM iRapid flash(Flash 3 times within 2 seconds); the blue GPS Rapid flash (Flash 2 times within 2 seconds) 
4) Check whether the GPS positioning is ready; if not, please make the initial positioning at an open area outdoors.
b. The server displays the terminal in an offline state.
   First inspect whether the 3 indicators are working normally; if the indicators’ view is obstructed, first check the state of the SIM card, as shown below:
 1) Dial the SIM card number of the terminal to check whether the phone connection is correct.
 2) Check whether there is GSM network signal, as in the underground parking.
 3) Inspect whether the disconnection is an isolated case and determine whether it is a fault on the part of the network operator.
 4) Check whether SIM card subscriber needs top-up recharge.
 5) Check whether the GPRS service is canceled (offline at last day of the month).
 6) Inquire the parameter setting. Check the serial number of the terminal and check whether interval time of the GPRS transmission is correct.
c. If the GPS function of the terminal is activated, and yet fails to locate, please check whether the terminal is installed according to the following requirements:
 1) When installing the terminal, the GPS antenna shall face skywards.
 2) No electromagnetic wave-absorbing substances (e.g. metal) shall be allowed above the terminal’s installed position; it shall be especially noted that there is no explosion-proof, heat-insulating membrane on the windshield above the terminal’s position, since the membrane contains high amount of metal elements which may absorb high-frequency electromagnetic wave and reduce the signal intensity, leading to poor accuracy of positioning and, even worse, to failure of positioning.
d. If there is poor GPS signal (surrounding high-rises blocking GPS signal), please drive the vehicle to an open area for location. Generally, initial location may take 1-2 minutes.
e. If the GSM signal receipt is working abnormally, please check whether the SIM card in the terminal is inserted correctly; or drive to a place with GSM signal coverage, since the signal may not cover certain areas (e.g. underground parking).